TSW100 is the first industrial unmanaged switch from Teltonika Networks. Equipped with five Gigabit Ethernet ports, four of which support IEEE802.3af and IEEE802.3at Power-over-Ethernet standards (PoE). Classified as power source equipment (PSE), it enables centralization of the power supply, providing up to 30 watts per port and reducing the effort for installing power. It has 10/100/1000 Mbps Ethernet ports for an economical high-bandwidth solution. Ideal for professional high bandwidth applications to provide both: reliable data connection and power supply.



5 x LAN ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover

PoE ports
Port 1- 4
PoE standards*
802.3af and 802.3at
TSW100 Batch 001 onwards:  use UTP (Unshielded) cable only when connecting non-Active PoE (non 803.3af/at) equipment or make sure that these devices support voltages, provided by TSW100 PSU.
PoE Max Power per Port (at PSE)
30 W
Total PoE Power Budget (at PSE)
120 W
Performance Specifications

Bandwidth (Non-blocking)
10 Gbps
Packet buffer
128 KB
Jumbo frame support
9216 bytes
MAC address table size
2K entries

4 pin industrial DC power socket
Input voltage range
7-57 VDC
Input voltage range for PoE
44-57 VDC
Power consumption (idle/max no PoE/max)
2 W/9 W/129 W
Physical Interfaces (Ports, LED's)

5 x RJ45 ports, 10/100/1000 Mbps
Status LED’s
1 x Power LED, 10 x LAN status LED’s
1 x 4 pin DC connector
1 x Grounding screw
Physical Specifications

Casing material
Full aluminum housing
Dimensions (W x H x D)
115 x 32 x 95 mm
DIN rail or wall mounting (additional kit needed), flat surface placement
Operating Environment

Operating temperature
-40 °C to +75 °C
Operating humidity
10 % to 90 % non condensing