PC104 Six Channel GNSS Locked Frequency Reference 

6 Channels 10 MHz, PPS and NMEA

Six independent 13 dBm sine outputs that are fault and transient protected and individually monitored. Channel status available over RS232 port. Outputs can be sine or square wave. NMEA -0183 port at full RS232 levels or 3.3 Vdc logic. PPS at 3.3 Vdc  Only a single voltage power source required. The unit also features an auto-calibration that compensates for long-term crystal drift provide years of precise performance. There is also a GPS lock status signal, PPS and serial port to provide access to NEMA time stamp data.

  • 26 channel high-sensitivity, high-accuracy Multi-GNSS receiver. Supports TRAIM, GPS, GLONASS, QZSS, SBAS, Active Anti-Jamming and Advanced Multipath Mitigation Functions.

  • PC104 compliant mechanical design

  • Operates from -60 to +60 Vdc power in three ranges

  • Auto-calibration minimizes long-term drift



Typical Phase Noise

Offset                   Phase Noise (dBc/Hz)

1 Hz                        -90

10 Hz                      -120

100 Hz                   -132

1Khz                      -140

Data Sheets